Chevron Digital Timer — Ew-32 User Manual Patched

Getting started

If you want to disable a specific program block without resetting the entire timer:

Connect the white wire from the wall box to the WHITE wire on the timer. (Note: The timer will not function without this connection).

This is the most confusing part of the EW-32 for new users. The rocker button has three distinct positions: chevron digital timer ew-32 user manual

Press the button to save all inputs and return to the main time display. Deleting or Restoring a Program Line

If you can tell me the (e.g., screen blank, program not starting) or what appliance you're trying to control , I can provide more specific help! Share public link

Before installing, ensure your electrical setup matches the technical limits of the device. 120VAC, 60Hz Maximum Resistive Load: 15A, 1800W Maximum Inductive Load: 12A (Ballast) Tungsten (Incandescent): 1200W Motor Load: 1/2 HP Getting started If you want to disable a

Used to enter clock-setting mode and switch between 12/24-hour formats or Daylight Saving Time.

Repeat the steps above for additional programs ( 2 ON / 2 OFF , 3 ON / 3 OFF , etc.). When finished, press the button to save your settings and return to the main time screen.

A: You likely set the ON time with the wrong AM/PM indicator. Reprogram the event carefully watching the small “AM” or “PM” icon on the left of the screen. The rocker button has three distinct positions: Press

Press the WEEK and HOUR buttons simultaneously (or look for a dedicated RND button sequence). A "RND" or "RANDOM" icon will appear on the display.

Press both WEEK and HOUR simultaneously again until the icon disappears. 7. Troubleshooting and Maintenance Potential Cause Verified Solution Blank LCD Screen Internal battery is dead.

Clock function (if available)

Hold the button for 3 seconds until the display flashes.

—bookmark it on your phone. Next time a power outage scrambles your schedule, you’ll have the complete Chevron EW-32 manual ready in 30 seconds.