Battery failed to reach gassing voltage within the safety window (typically 8–10 hours).
: Connect the charger output cable to the battery connector first. Ensure polarity is correct (positive to positive). exide cmp 2100 battery charger manual
Lead-acid batteries generate explosive hydrogen gas during charging. Ensure the charging area has adequate ventilation. Battery failed to reach gassing voltage within the
Check if the battery was over-discharged below 1.5V per cell. You may need to use a manual shop charger to bring the voltage up to a baseline level so the CMP 2100 can take over. Fault Code: F2 or "Over-Temperature Fault" You may need to use a manual shop
The Exide CMP 2100 (often categorized under the Ceil, Chloride Motive Power, or GNB Industrial Power legacy lineages) is a conventional, high-efficiency, microprocessor-controlled industrial battery charger. It is engineered primarily for flooded (vented) and regulated (valve-regulated/gel) lead-acid traction batteries. Key Specifications
The charger will complete its normal cycle and then automatically transition into an extended, low-current equalization phase.
Connected battery voltage exceeds the rated output capacity of the charger.