Amount of material to leave for the finishing tool. Feed Rates: Separate settings for roughing and finishing. Other Key Cycles
The 0i-TF Plus controls a 2-axis Lathe (typically).
The first section is not about writing code; it is about thinking in code. It covers: fanuc series oitf plus programming manual
Sends the turret back to its reference home position via an intermediate point. Maximum Spindle Speed Limit
Circular interpolation in a counter-clockwise direction. Amount of material to leave for the finishing tool
When using constant surface speed ( G96 ), always clamp the maximum spindle speed using G50 (e.g., G50 S2500 ) to prevent dangerous RPM levels near the center of rotation.
| Code | Group | Description | | :--- | :--- | :--- | | | 01 | Rapid Traverse. Moves the tool at maximum speed (non-cutting). | | G01 | 01 | Linear Interpolation. Cutting feed in a straight line. | | G02 | 01 | Circular Interpolation CW. Cutting arc (Clockwise). | | G03 | 01 | Circular Interpolation CCW. Cutting arc (Counter-Clockwise). | | G32 | 01 | Threading. Used for straight/taper threading. | | G28 | 00 | Reference Point Return. G28 U0 W0 sends turret home. | | G40 | 07 | Cutter Compensation Cancel. | | G41 | 07 | Cutter Compensation Left. | | G42 | 07 | Cutter Compensation Right. | | G50 | 00 | Coordinate System Setting / Max RPM Clamp. | | G96 | 02 | Constant Surface Speed (CSS). Maintains surface speed as diameter changes. | | G97 | 02 | Constant RPM. Revolutions Per Minute mode. | The first section is not about writing code;
The is a vast resource, but understanding the basics of program structure, Manual Guide i conversational features, and the safe use of turning cycles will significantly improve productivity. Mastering this controller allows for faster setups, complex part manufacturing, and superior surface quality.
Programming example: