Hpe Smart Array S100i Sr Gen10 Driver Windows Server 2022 Site

After installation, confirm using:

Thus, the correct is not optional—it’s mandatory for production use.

If you are reading this, you have likely just slammed your fist on the desk. You are trying to install Windows Server 2022 on a server (DL20, DL120, ML110, etc.) that uses the HPE Smart Array S100i SR Gen10 software RAID controller. hpe smart array s100i sr gen10 driver windows server 2022

| Version | Windows Server | Status | Notes | |---------|----------------|--------|-------| | 1010.14.0.0 | 2022 | Recommended | Initial Windows Server 2022 support | | 106.12.6.0 | 2016, 2019 | Critical update | Addresses potential data inconsistency during RAID creation/operation; RAID 0 and single‑drive RAID 1 are not affected | | 106.12.6.0(D) | 2019 / loads on 2022 | – | Confirmed to load on Windows Server 2022 despite being packaged for Server 2019 |

If your operating system is already running but you need to update the S100i driver to fix bugs or enhance performance, follow these steps: Download the latest .exe Smart Component driver from HPE. After installation, confirm using: Thus, the correct is

If you boot directly from a standard Windows Server 2022 ISO, the installer will often show zero available drives because the generic Microsoft SATA driver cannot read the proprietary HPE software RAID metadata. Prerequisites Before Driving Installation

To monitor and configure your arrays within Windows, you should install the HPE Smart Storage Administrator (SSA) . This utility allows you to perform online capacity expansion and check drive health directly from the desktop. | Version | Windows Server | Status |

This article provides a deep dive into everything you need to know about the ecosystem. We will cover what the S100i is, where to find the correct driver, step-by-step installation methods, common troubleshooting pitfalls, and best practices for a stable deployment.

Support and lifecycle