Reinstall the CH340 driver. Swap your USB cable for one that supports data transfer, not just charging. Try a USB 2.0 port instead of a USB 3.0 port. "Connecting Fail / Target Board Not Responding"
Follow the on-screen instructions to complete the installation. Alternative: Running Without Installation (Python)
: It is a "one-and-done" tool. Use it to set up your Wi-Fi and update firmware, then transition to more robust software like for actual project design and machine control. EnduranceLasers specific steps to connect your MKS board to your Wi-Fi network? CNC/Laser Technician UX Designer
: A common bug causes buttons to appear unclickable; this is usually resolved by right-clicking the program and selecting "Run as Administrator" Interface Fragmentation
: Because Makerbase tools lack expensive Microsoft digital signatures, Windows Defender SmartScreen might block the launch. Click More Info and then select Run Anyway . mks laser tool setup v112exe download link
Configure your local network SSID and password to enable wireless control of your engraver.
Select the .bin firmware file downloaded from the Makerbase GitHub .
If you are looking for specific firmware to use with this tool, I recommend checking the Makerbase MKS GitHub or the documentation from your laser manufacturer (e.g., Mecpow, Creality).
Flashing updated firmware is crucial for fixing bugs, unlocking faster engraving speeds, or enabling specific display screens (like the TS24 or TS35 touchscreens). Reinstall the CH340 driver
With the board connected via USB, navigate to the section. Enter your home or workshop WiFi SSID (Name) and Password . Click Connect or Write Configuration .
Click to allow your laser to operate via the web interface or phone apps. 4. Troubleshooting: MKS Tool Not Connecting
Provides an "MKS ESP32 Download Tool" to flash .bin firmware files to the motherboard.
The official download for the MKS Laser Tool Setup V1.1.2.exe "Connecting Fail / Target Board Not Responding" Follow
Press and hold the "Boot" button on the physical MKS DLC32 board right as you click "Start" in the software to force the chip into flashing mode.
This public link is valid for 7 days and shares a thread, including any personal information you added. This link or copies made by others cannot be deleted. If you share with third parties, their policies apply. Can’t copy the link right now. Try again later.
The latest versions are hosted on the Makerbase MKS GitHub .
The (specifically version 1.1.2) is a specialized Windows utility developed by Makerbase for managing laser engraving motherboards like the DLC32 . It is primarily used for flashing firmware, configuring Wi-Fi settings, and converting images to G-code (NC Tool). Download Link
: Connect your laser engraver to a local network to enable wireless control and file transfers without a physical touchscreen.