Nitocote Pe135 Msds -

: In case of a surrounding site fire, use water spray, carbon dioxide ( CO2cap C cap O sub 2 ), dry chemical, or alcohol-resistant foam.

If the product is discontinued, contact Sika technical service with the batch number.

Dispose of contents/container in accordance with local, regional, and national regulations. 7. Technical Data & Application Guidelines nitocote pe135 msds

4. Handling, Storage, and Personal Protective Equipment (PPE) Handling Guidelines

Nitocote PE135 is a single-component, non-hazardous, water-based rubberized bitumen emulsion. Unlike traditional bitumen coatings that rely on volatile organic solvents, Nitocote PE135 uses water as its carrier medium, significantly reducing its environmental impact and toxicity profile. Nitocote PE135 Manufacturer: Fosroc International Ltd. : In case of a surrounding site fire,

Empty drums or pails may retain product residue. Dispose of packaging responsibly through authorized industrial waste recycling facilities.

Ensure adequate ventilation, especially in confined spaces. Avoid direct contact with eyes and prolonged contact with skin. Do not eat, drink, or smoke while handling this product. Wash hands thoroughly before breaks and after finishing work. Unlike traditional bitumen coatings that rely on volatile

To maximize the efficacy of the product and maintain a safe environment, the following procedures should be observed. Safe Handling and Storage

: Wear tight-fitting chemical splash goggles, protective gloves, and appropriate clothing.

In case of a fire, appropriate extinguishing media should be used. Water spray, foam, dry chemical, or carbon dioxide can be effective, depending on the composition of the product.