The RC522 is a popular and powerful RFID module, but its simulation in Proteus is currently limited. While you can find libraries that allow you to include the RC522 in your schematics, a full behavioral simulation is generally not available. The best approach is to use the available libraries for schematic capture and then rely on hardware testing or alternative simulation methods for functional verification. By setting realistic expectations and using the resources and techniques outlined in this article, you can still make progress on your RC522 projects.
C:\Program Files (x86)\Labcenter Electronics\Proteus 8 Professional\DATA\LIBRARY Paste the Files : Copy your downloaded files into this Restart Proteus : Close and reopen Proteus to refresh the component list. Search for the Component
To view the output, pick a from the Instruments toolbar on the left. Connect the Virtual Terminal's RXD pin to the Arduino's TXD (Pin 1) pin. 2. Writing and Compiling the Arduino Firmware rc522 proteus library top
mfrc522.PCD_SetRegisterValue(TModeReg, 0x8D); // Adjust timing
#include #include #define RST_PIN 9 #define SS_PIN 10 MFRC522 mfrc522(SS_PIN, RST_PIN); // Create MFRC522 instance void setup() Serial.begin(9600); // Initialize serial communications with the PC while (!Serial); // Do nothing if no serial port is opened SPI.begin(); // Init SPI bus mfrc522.PCD_Init(); // Init MFRC522 Serial.println(F("Scan PICC to see UID...")); void loop() // Reset the loop if no new card present on the sensor/reader. if ( ! mfrc522.PICC_IsNewCardPresent()) return; // Select one of the cards if ( ! mfrc522.PICC_ReadCardSerial()) return; // Show UID on serial monitor Serial.print(F("Card UID:")); for (byte i = 0; i < mfrc522.uid.size; i++) Serial.print(mfrc522.uid.uidByte[i] < 0x10 ? " 0" : " "); Serial.print(mfrc522.uid.uidByte[i], HEX); Serial.println(); delay(1000); Use code with caution. The RC522 is a popular and powerful RFID
Here is the standard pinout for connecting the simulated RC522 to an Arduino Uno in Proteus:
: If the library uses a custom simulation model, you may need to right-click the component and select a By setting realistic expectations and using the resources
C:\Program Files (x86)\Labcenter Electronics\Proteus 7 Professional\LIBRARY
Serial.println(); Serial.print("Message : "); content.toUpperCase(); if (content.substring(1) == "83 AA 1B 2A") // Change here the UID of the card/cards that you want to give access Serial.println("Authorized access"); Serial.println(); delay(3000); else Serial.println(" Access denied"); delay(3000);