Reset Epson L396

For models without a screen, try turning the printer off, then hold the "i" (Information) button and the Power button simultaneously for 5 seconds until the lights start blinking. 3. Resetting Ink Levels

| Step | Action | | --- | --- | | 1 | Verify the error is really the waste ink counter (alternating lights + PC message). | | 2 | Inspect the physical ink pad – replace if soaking wet. | | 3 | Download WIC Reset Utility or Epson Adjustment Program. | | 4 | Connect printer via USB and reset the waste ink counter(s). | | 5 | Turn printer off/on. Your Epson L396 should work again. | | 6 | (Optional) Install external waste ink tank to prevent future resets. |

is by using the . This software utility directly communicates with the printer's firmware to reset the counter. Prerequisites:

🔴 It is too easy to brick your printer. reset epson l396

If you're still experiencing issues with your Epson L396 printer after resetting it, you may want to consider contacting Epson support or visiting an authorized service center for further assistance.

: Turn the printer off and back on when prompted to complete the process. Method 2: Using the WIC Reset Utility

Show you how to to avoid future issues

Sarah clicked the power button, watched the lights fade, and waited ten long seconds. When she pressed it again, the aggressive blinking was gone. The printer whirred, the head moved smoothly, and the green "ready" light stayed solid. She hit "Print" on her report. The

: Once this digital counter reaches 100%, the Epson Status Monitor 3 software locks the device to prevent ink overflows that could damage your desk or the internal printer circuitry.

A Factory Reset is completely different from a waste ink counter reset. You perform a factory reset to clear network settings (Wi-Fi passwords), printer name, and customized preferences, not to fix hardware errors. For models without a screen, try turning the

Once the counter reaches 100%, the printer stops functioning, and the lights flash.

Ensure your USB connection is secure, try a different USB port on your PC, and confirm no other print jobs are stuck in the print queue.

Epson printers include internal absorbent pads that collect excess ink during cleaning cycles and borderless printing. The printer monitors how much ink is used and, once the pads are estimated to be full, it stops printing to prevent ink from spilling inside the machine. All printer lights flash simultaneously. | | 2 | Inspect the physical ink