Connect the main AC power line (Line and Neutral).

The specific channel or instance number of that point type.

Don't worry. You aren't the first person to lose the dog-eared, coffee-stained binder that shipped with the unit. The good news is that the is still the best troubleshooting tool you own—you just need to know where to find it and how to read it efficiently.

5A/250V AC (resistive load) for output relays.

If you're reading a review, pay attention to comments about the remote's ease of use, range, battery life, and durability.

If you are reading this, you are likely standing next to a wellhead, a pumping unit, or a compressor station staring at a ROC-2015 (Remote Operations Controller) and wondering two things:

(All outputs are dry contacts):

Upon boot, the inlet valve opens, and the flush valve opens for a factory-set duration (typically 60 seconds). The high-pressure pump remains off to clear loose debris without straining the membrane. 2. Production Mode

Connects directly to the product water tank's level float assembly. This contact relies on a normally closed configuration. When the tank hits maximum capacity, the float circuit breaks, shifting the controller into an automated flush-and-standby status.

The individual data attribute (e.g., Parameter 3 for Current Value, Parameter 5 for Low Alarm Limit). Flow Measurement Applications

Turbine, rotary, and ultrasonic meter pulse calculations.

The ROC800-Series controller bridges the gap between traditional Programmable Logic Controllers (PLCs) and Remote Terminal Units (RTUs). It combines the physical ruggedness of an RTU with the computational power and high-point count of a PLC. Key Technical Specifications 32-bit Motorola PowerPC. Operating Temperature: -40°C to 75°C (-40°F to 167°F). Power Input: 11 to 30 VDC.