Sharp Atomic Clock Spc373 User Manual [work] Access

433.92MHz wireless technology allows the outdoor sensor to send data to the main unit without wires. 2. Getting Started: Sharp SPC373 Setup Guide Follow these steps to ensure your Sharp Atomic Clock is set up correctly for the best performance. Step 1: Install Batteries in the Sensor Open the battery compartment on the remote sensor. Set the channel switch to Channel 1 . Insert the batteries (usually 2 x AA) and close the cover. Step 2: Install Batteries in the Clock Insert batteries (usually 2 x AA) into the main clock unit.

A tower icon with waves indicates the clock is receiving the signal. sharp atomic clock spc373 user manual

: Supports seven time zones (Atlantic to Hawaii) and 12/24-hour formats. Step 1: Install Batteries in the Sensor Open

Place the clock on a window sill facing Colorado. Keep it at least 3 feet away from computers, TVs, routers, or microwave ovens, which cause electromagnetic interference. The clock syncs best between midnight and 4:00 AM when atmospheric disturbance is lowest. Step 2: Install Batteries in the Clock Insert

Based on user feedback and expert Q&As, here are the most frequent problems with the SPC373 and how to solve them.

The display is faint, or the backlight causes the screen to blank out. Low battery power.

Press and hold the button for 2–3 seconds until the alarm hour digits begin to flash.