Configure COM Port settings to match the total station configuration (Baud Rate, Data Bits, Parity).
Converts survey points and lines directly into Drawing Exchange Format (DXF) for immediate use in CAD software.
Press or Send on the instrument. You will see the data stream across the ProLink screen. sokkia prolink version 115
Once installed, the software must be configured to communicate with your specific instrument. This involves matching communication parameters between ProLink and your total station. The key settings include Baud rate (typically 9600 baud) , Data bits (8 bits) , Parity (none) , and Stop bit (1) . Ensuring these values match on both the software and the instrument is critical for a successful connection.
ProLink 1.15 includes built-in COGO functions that enable surveyors to perform calculations in the office, such as: Inverse calculations. Intersection calculations. Azimuth/distance calculations. 4. Data Export and Reporting Configure COM Port settings to match the total
Using Sokkia ProLink 1.15 is a straightforward process once it is set up correctly.
Includes basic COGO features for land surveying, allowing for field-to-office calculations directly within the software. You will see the data stream across the ProLink screen
It allows users to "Receive Data" from a total station by establishing a serial connection and initiating the download from the instrument's memory (MEM) menu.
While modern software suites often integrate these utilities into massive, resource-heavy programs, ProLink 1.15 stands out for its simplicity, speed, and low system overhead. It bridges the gap between field hardware and CAD platforms like AutoCAD, Civil 3D, or Carlson Survey. Key Features and Capabilities 1. Robust File Format Conversion