Solar Camera Yn88-wifi Manual -

: Integrated solar panels with an internal rechargeable lithium battery.

Search for UBox or uBell on the App Store or Google Play, or scan the QR code found in your physical manual. 2. Connecting to Wi-Fi Watchmen Solar Powered WIFI IP Camera YN88

Here are key manual details and setup steps for the YN88‑WIFI solar IP camera (concise summary from available user manuals):

🔁 Solar power depends on weather. In cloudy weeks, the battery may need a top-up via USB.

Attach the camera to the bracket and adjust the viewing angle before tightening the joint gears. solar camera yn88-wifi manual

high. Placing it too high may reduce the sensor's effective range, which is about 15–25 feet. Solar Panel Orientation

Check if the battery has dropped below its critical operational threshold due to prolonged rainy weather. Bring it inside for a manual USB charge.

Set to Low, Medium, or High . High sensitivity detects objects further away but may increase battery drain due to repeated triggers from shifting winds or distant movement. Power Management Modes:

Tap the "+" icon or "Add Device" button in the mobile app. Select "Setup 4G/Wi-Fi Camera" and choose the Wi-Fi option. : Integrated solar panels with an internal rechargeable

Continuous Mode: The camera records non-stop. This mode depletes the battery rapidly and should only be used if the camera is connected to a continuous external power supply.

Heavy-duty brackets for wall or pole installation.

Note: If the connection fails, locate the button (pinhole) on the camera. Press and hold it for 5-10 seconds until you hear a voice prompt or a beep, then try the setup process again.

Set the camera to "Low Power Mode" where it sleeps until motion is detected. Avoid "Continuous Recording Mode" unless the camera is constantly receiving intense, uninterrupted daily sunlight. Connecting to Wi-Fi Watchmen Solar Powered WIFI IP

Choose "Low Power Mode" for optimal battery longevity. In this mode, the camera remains in a sleep state until awakened by the PIR sensor or manual user live-view streams.

: Attach the WiFi antenna and turn on the camera using the power button, usually located on the bottom or under a protective cover. App Installation : Download and install the

: Rated at IP67 waterproof , the aluminum alloy and plastic enclosure is designed to withstand rain, dust, and rust.